点击图片查看原图
Sanimaster PE
Made in Germany
Compact sewage disposal unit with plastic – or steel tank.
Application
HOMA Sanimaster PE, FE, VA compact sewage disposal units are suitable for pumping sewage and waste water from areas below the sewer level (see DIN 1986). With their large tank volumes and high performance submersible waste water pumps they are the ideal solution for the disposal from large private, commercial or public buildings, hospitals, schools etc.
The compact design allows a packed installation with minimum space requirement.
The horizontal pump position with the straight-thru tank-pump discharge connection avoids unnecessary elbows. With flanged gate valves fitted between the tank and the pumps, the twin pump unit operates even with one pump disassembled for maintanance or repair.
The tanks are available in different materials with volumes from 180 up to
1000 litres.
DIN EN 12050-1: Conformity and design approved and controlled by LGA,
certificate No. 0220119.
Pumped liquid: Clear water or drainage water, waste water or sewage containing soft solids. Max. liquid temperature: 35°C, short term up to 60°C.
Operation: Intermittent.
Design
Flood protected single or twin pump lifting station consisting of:
Collecting tank: Odour and gas tight tank.
Plastic tank:
Total volume 400 l, tandem installation with two tanks up to 800 l.
Inlets: DN 150 horizontal (3x), DN 100 vertical.
Air vent DN 70.
Connection for diaphragm pump DN 50.
Cleaning cover with screw cap. Connections for pneumatic level control and float switch.
Steel tank, galvanized or stainless steel:
Total volume 180 l up to 1000 l (larger volumes on request).
Inlet: DN 150 horizontal. Air vent DN 70. Connection for diaphragm pump BSP 11/2“F. Cleaning cover with screw cap. Connections for pneumatic level control and float switch.
Pumps: Single stage sewage pumps. Horizontal installation, discharge vertical.
Impellers: Enclosed single-vane impeller (M) or vortex impeller (V).
Motors: Fully submersible, pressure tight electric motors 400-415 V / 3 Ph. Thermal sensors embedded in the winding. Insulation class F. Degree of protection IP 68. Large diameter stainless steel rotor shaft, pre-lubricated bearings.
Seals: Combination of two mechanical seals (silicon-carbide) in a separate oil chamber. Oil inspection from outside.Electronical seal probe fitted into
the oil chamber on request.
Explosion protection: All models are available with explosion proof motors according to II 2 G EEx de [ib] IIBT4.
Materials:
Collecting tank see tank types
Motor housing, Cast iron
pump housing, GG25/EN-GJL-250
impeller
Rotor shaft, Stainless steel
screws
Seal kit Perbonane
Equipment supplied
Tank with 1 pump or 2 pumps. Elastic hose connections with bands for tank inlet, connection tank-pump, air vent and diaphragm pump. 1 Elastic unio piece DN 100 per pump for discharge connection (with flange DN 80 or DN 100 depending on the pump type).
Pneumatic level control. Electronic control panel.
